First, the material
1. In spring and summer, the material of cotton, COTTON, LINEN, and RAMIE is the main material, followed by RAYON and telescopic nylon.
2. Autumn and winter mainly by wool, rabbit hair, followed by nylon and rayon.
3. The current trend is to use blends with other fibers to increase the appearance of wool fabrics. For example, Wool has very good restoring force and is therefore difficult to set, but completely changed after blending.
. WOOL舆POLYESTER blends increase stability and is easier to care for. 45% of WOOL舆5% 5% POLYESTER blends are representative of the current mid-priced market.
. WOOL and RAYON were once representative blends of sand in the 90s, making the fabric more detailed and dynamic.
. Wool/Linen: A new fashion theme that combines the rustic feel of flax with the elegant feel of wool to make it wrinkle-free, but it can make the fabric drape.
. COTTON/ LINEN: This blend of summer jackets, pants and shirts is becoming more and more popular. Due to the emphasis on fluidity and its coarser feel, COTTON/LINEN has increased significantly in the popular market.
Second, textile knowledge
1. Knits (KNITS) is a combination of high and low needles, making the knitted fabric more or less flexible. Sweaters, knits, SWEATSHIRT, SWEAT-PANTS, and TEE are knitted fabrics.
. Since the cotton thread itself is heavier than the wool, the cotton sweater is heavier than the sweater and heavier than the plain fabric.
. Knits are more easily deformed unless SPEDEX or ARCYLIC is added.
2. Flat Line (WOVEN)
. The flat fabric is completely non-stretchable. The shirts (SHIRT) and the jeans (Jeans) are woven in flat fabrics.
. Feel quite good, not easily deformed.
ã€bleaching and dyeing】
A. Before all yarns are woven, they must be bleached.
B. Dyeing can be divided into yarn dyeing and cloth dyeing.
ã€Dyeing】
. When dyed from the yarn, it is woven again.
. Mostly used for cotton yarn and yarn, suitable for plain, simple stripes and grids, not easy to fade, the price is higher.
ã€Dyeing】
. Weave into cloth and then dye it.
. All the fabrics can be used for complex printing.
. RAYON and other chemical fiber printing cloth dyeing.
. The underside of cloth dyeing is lighter.
4. printing
A. Watermark: The printing surface is rough, it is easy to fade, and the unit price is lower.
B. offset printing:
. The printed surface is gelatinous and will not fade, resulting in higher costs.
. Suitable for printing light-colored prints on dark clothing.
. Do not tumble dry, otherwise the prints will stick together or dry clean.
Third, commonly used fibers and characteristics
1. Natural fiber:
. COTTON (cotton): Sweat-absorbent, soft.
. LlNEN (hemp): easy to wrinkle, straighten, ventilation, high prices after finishing.
. RAMIE (ramie): It is a kind of hemp material. The yarn is thicker. It is usually used for window cloth or sofa cloth. It is used for clothes, usually mixed with hemp.
. WOOL (Wool): The yarn is fine and it is not easy to pill.
. LAMBSWOOL (small wool): The yarn is relatively thick, and is generally mixed with ANCYLIC (polypropylene fiber) to make the clothes not easily deformed.
. MOHAIR (Mahai Mountain Wool): Fluffy, warmer.
. vCASHMERE (Kashmir Mountain Wool and Cashmere): The fiber is thin, light and soft, and it is comfortable to touch.
. ANGOLA (angora goat wool or rabbit fur): fine, loose wool, soft, elastic, and high price.
. SILK (silk), soft, with a beautiful luster, hygroscopicity.
2. Chemical Fiber:
. RAYON (Rayon): Very light, soft, used for COL-LECTION shirts.
. POLYESTER (polyester fiber): Similar to rayon, it is well handled, it is not easy to wrinkle after ironing, and it is cheap.
. SPANDEX (Flexible Nylon): It has elasticity in itself, and most of it is mixed with cotton. It only needs to contain 5--10% of its original size.
2. Nylon (NYLON): easy to dry after washing, apply general lotion, to avoid prolonged exposure, so as not to yellow clothes, it should be dry in a cool and ventilated place, ironing ironing cloth, temperature 120 degrees - 130 degrees.
3. Polyester fiber (POLYESTER): easy to wash and dry, ventilated place is the best place to dry, do not have to console.
4. LINEN, RAMIE, wash with neutral soap or neutral lotion.
5. Rayon: Dry cleaning is the best method of washing. When the label can be washed, it should be washed with cold water. After washing, it should be dehydrated. Do not wrung it out by hand. The iron temperature should be 130-140°C.
6. COTTON: Wash with soap or neutral laundry detergent, do not use detergent containing fluorescent agent, do not soak bleach. Cotton products are easy to mold, so must ensure that the town's dry and then collect, do not use a dryer.
7. WOOL: Use dry cleaning as the best cleaning method. Disable hot water, alkaline or concentrated acid washing if the mark is available for washing. After dissolving in neutral water at 30 degrees, wash it again and gently rinse.
Wash with a brush, wash naturally flat dry, covered with a layer of white cloth and then sun, avoid direct sunlight in accordance with the shot; when ironing, the temperature needs to be moderate (about l40 degrees), it is best to put a cloth on the ironing cloth .
For more content, please follow this site
There are many different types of agate depending on
the colors and formation. Common types of agate include blue agate, moss
agate, green agate, tree and wood agate, Indian black agate, Montana
agate, banded agate, red agate, graveyard point agate. A Mexican agate,
showing only a single eye, has received the name of cyclops agate.
Included matter of a green, golden, red, black or other color or
combinations embedded in the chalcedony and disposed in filaments and
other forms suggestive of vegetable growth, gives rise to dendritic or
moss agate.
How to identify and choose the agate?
Agate is a kind of Gemstone Jewelry ,the jewelry which produced by
agate is quite popular with women. But How to identify the true
agate?Please according to the following rules.The symbol of the
difference between Natural agate and false is there has cross-sectional
structure of a layer of grain, Make use of this flag, agate
will be very easy to identify. The finished products after cutting,
because there is no obvious pattern neatly, so it's easy to confuse the
two. But generally speaking, natural agate has cool feeling, like a
painted surface, a layer of wax and a wax luster, translucency, It's the
hardness of the Moroccan 6-7,Even it will not scratch if use the knife.
Because it is in the molten state to form crystals, so mostly of them
are spherical, the internal structure of the nature agate is tighter.
After grinding the surface is more delicate, rough wood and agate for a dramatic friction, instant, the agate is
not fever, but wood will burning. It Is often mixed with a variety of
colors, forming a beautiful pattern, such as the flowery one or the
striped one.
The fake agate is synthetic, part of them are act as a high-quality stone. Its basic features are: Though it has cool handfeel, but there is no waxy feel and gloss. Some of the hardness is low, It is not easy to Score the agate with a knife . broke it and observed the cross-section, in addition to it has not the laminated structure, granular-roughened or hispidulous;Check for any gaps. Opaque, the color is clear-cut. Some unscrupulous traders glue a thin layer of organic on the surface of fake agate, it will giving a waxy luster and good feeling .This gives a person a kind of illusion. Meantime, The name must not let confuse an eye when buying, must notice to distinguish. Please Careful selection .
 |
 |
2, texture: most of the fake agate are made of imitation stone ,The Texture is more softer than the real one. It is easy to Score the fake agate with a knife , and It is not easy to Score the real one with a knife. On the surface,usually the real one has pure without any defect. The more expensive an item is the more carefully we should examine it for faults.
3, Transparency:The Transparency of the natural agate is not as good as the synthetic one, it is a little chaos in it.But the transparent of the Synthetic agate is good as glass balls.
4, weight: the weight of real agate jewelry is higher than synthetic agate.
5, temperature: the real agate is cool in summer and warm in winter, but the temperature of fake agate isn't maintained internally the way it is, but fluctuates with the temperature of their environment.
Agate Products, Agate Slice Jewelry, Agate Cameo Jewelry, Red Agate Jewelry, White Agate Jewelry
JOYA GIFT CO.,LIMITED , https://www.joya-jewelry.com